chore(docs): Updated with collections command

.github/PULL_REQUEST_TEMPLATE.md

@@ -12,4 +12,3 @@
 - [ ] Ran `reset.yml` playbook
 - [ ] Did not add any unnecessary changes
 - [ ] 🚀
-- [ ] Ran pre-commit install at least once before committing

.github/download-boxes.sh

@@ -1,37 +0,0 @@
-#!/bin/bash
-
-# download-boxes.sh
-# Check all molecule.yml files for required Vagrant boxes and download the ones that are not
-# already present on the system.
-
-set -euo pipefail
-
-GIT_ROOT=$(git rev-parse --show-toplevel)
-PROVIDER=virtualbox
-
-# Read all boxes for all platforms from the "molecule.yml" files
-all_boxes=$(cat "${GIT_ROOT}"/molecule/*/molecule.yml |
-    yq -r '.platforms[].box' |         # Read the "box" property of each node under "platforms"
-    grep --invert-match --regexp=--- | # Filter out file separators
-    sort |
-    uniq)
-
-# Read the boxes that are currently present on the system (for the current provider)
-present_boxes=$(
-    (vagrant box list |
-        grep "${PROVIDER}" | # Filter by boxes available for the current provider
-        awk '{print $1;}' |  # The box name is the first word in each line
-        sort |
-        uniq) ||
-        echo "" # In case any of these commands fails, just use an empty list
-)
-
-# The boxes that we need to download are the ones present in $all_boxes, but not $present_boxes.
-download_boxes=$(comm -2 -3 <(echo "${all_boxes}") <(echo "${present_boxes}"))
-
-# Actually download the necessary boxes
-if [ -n "${download_boxes}" ]; then
-    echo "${download_boxes}" | while IFS= read -r box; do
-        vagrant box add --provider "${PROVIDER}" "${box}"
-    done
-fi

.github/workflows/lint.yml

@@ -5,69 +5,26 @@ on:
   push:
     branches:
       - master
-    paths-ignore:
+
-      - '**/README.md'
 jobs:
-  pre-commit-ci:
+  ansible-lint:
-    name: Pre-Commit
+    name: YAML Lint + Ansible Lint
     runs-on: ubuntu-latest
-    env:
-      PYTHON_VERSION: "3.10"
 
     steps:
       - name: Check out the codebase
         uses: actions/checkout@2541b1294d2704b0964813337f33b291d3f8596b # 3.0.2
+
+      - name: Set up Python 3.x
+        uses: actions/setup-python@b55428b1882923874294fa556849718a1d7f2ca5 #4.0.2
         with:
-          ref: ${{ github.event.pull_request.head.sha }}
+          python-version: '3.x'
 
-      - name: Set up Python ${{ env.PYTHON_VERSION }}
+      - name: Install test dependencies
-        uses: actions/setup-python@13ae5bb136fac2878aff31522b9efb785519f984 # 4.3.0
+        run: pip3 install yamllint ansible-lint ansible
-        with:
-          python-version: ${{ env.PYTHON_VERSION }}
-          cache: 'pip' # caching pip dependencies
 
-      - name: Cache pip
+      - name: Run yamllint
-        uses: actions/cache@9b0c1fce7a93df8e3bb8926b0d6e9d89e92f20a7 # 3.0.11
+        run: yamllint .
-        with:
-          path: ~/.cache/pip
-          key: ${{ runner.os }}-pip-${{ hashFiles('./requirements.txt') }}
-          restore-keys: |
-            ${{ runner.os }}-pip-
 
-      - name: Cache Ansible
+      - name: Run ansible-lint
-        uses: actions/cache@9b0c1fce7a93df8e3bb8926b0d6e9d89e92f20a7 # 3.0.11
+        run: ansible-lint
-        with:
-          path: ~/.ansible/collections
-          key: ${{ runner.os }}-ansible-${{ hashFiles('collections/requirements.txt') }}
-          restore-keys: |
-            ${{ runner.os }}-ansible-
-
-      - name: Install dependencies
-        run: |
-          echo "::group::Upgrade pip"
-          python3 -m pip install --upgrade pip
-          echo "::endgroup::"
-
-          echo "::group::Install Python requirements from requirements.txt"
-          python3 -m pip install -r requirements.txt
-          echo "::endgroup::"
-
-          echo "::group::Install Ansible role requirements from collections/requirements.yml"
-          ansible-galaxy install -r collections/requirements.yml
-          echo "::endgroup::"
-
-      - name: Run pre-commit
-        uses: pre-commit/action@646c83fcd040023954eafda54b4db0192ce70507 # 3.0.0
-
-  ensure-pinned-actions:
-    name: Ensure SHA Pinned Actions
-    runs-on: self-hosted
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@2541b1294d2704b0964813337f33b291d3f8596b # 3.0.2
-      - name: Ensure SHA pinned actions
-        uses: zgosalvez/github-actions-ensure-sha-pinned-actions@6ca5574367befbc9efdb2fa25978084159c5902d # 1.3.0
-        with:
-          allowlist: |
-            aws-actions/
-            docker/login-action

.github/workflows/test.yml

@@ -5,8 +5,7 @@ on:
   push:
     branches:
       - master
-    paths-ignore:
+
-      - '**/README.md'
 jobs:
   molecule:
     name: Molecule
@@ -25,8 +24,6 @@ jobs:
     steps:
       - name: Check out the codebase
         uses: actions/checkout@2541b1294d2704b0964813337f33b291d3f8596b # 3.0.2
-        with:
-          ref: ${{ github.event.pull_request.head.sha }}
 
       - name: Configure VirtualBox
         run: |-
@@ -36,16 +33,8 @@ jobs:
           * fdad:bad:ba55::/64
           EOF
 
-      - name: Cache pip
-        uses: actions/cache@9b0c1fce7a93df8e3bb8926b0d6e9d89e92f20a7 # 3.0.11
-        with:
-          path: ~/.cache/pip
-          key: ${{ runner.os }}-pip-${{ hashFiles('./requirements.txt') }}
-          restore-keys: |
-            ${{ runner.os }}-pip-
-
       - name: Cache Vagrant boxes
-        uses: actions/cache@9b0c1fce7a93df8e3bb8926b0d6e9d89e92f20a7 # 3.0.11
+        uses: actions/cache@fd5de65bc895cf536527842281bea11763fefd77 # 3.0.8
         with:
           path: |
             ~/.vagrant.d/boxes
@@ -53,27 +42,15 @@ jobs:
           restore-keys: |
             vagrant-boxes
 
-      - name: Download Vagrant boxes for all scenarios
-        # To save some cache space, all scenarios share the same cache key.
-        # On the other hand, this means that the cache contents should be
-        # the same across all scenarios. This step ensures that.
-        run: ./.github/download-boxes.sh
-
       - name: Set up Python ${{ env.PYTHON_VERSION }}
-        uses: actions/setup-python@13ae5bb136fac2878aff31522b9efb785519f984 # 4.3.0
+        uses: actions/setup-python@v2
         with:
           python-version: ${{ env.PYTHON_VERSION }}
-          cache: 'pip' # caching pip dependencies
 
       - name: Install dependencies
-        run: |
+        run: >-
-          echo "::group::Upgrade pip"
+          python3 -m pip install --upgrade pip &&
-          python3 -m pip install --upgrade pip
-          echo "::endgroup::"
-
-          echo "::group::Install Python requirements from requirements.txt"
           python3 -m pip install -r requirements.txt
-          echo "::endgroup::"
 
       - name: Test with molecule
         run: molecule test --scenario-name ${{ matrix.scenario }}
@@ -81,12 +58,10 @@ jobs:
           ANSIBLE_K3S_LOG_DIR: ${{ runner.temp }}/logs/k3s-ansible/${{ matrix.scenario }}
           ANSIBLE_SSH_RETRIES: 4
           ANSIBLE_TIMEOUT: 60
-          PY_COLORS: 1
-          ANSIBLE_FORCE_COLOR: 1
 
       - name: Upload log files
         if: always() # do this even if a step before has failed
-        uses: actions/upload-artifact@83fd05a356d7e2593de66fc9913b3002723633cb # 3.1.1
+        uses: actions/upload-artifact@3cea5372237819ed00197afe530f5a7ea3e805c8 # 3.1.0
         with:
           name: logs
           path: |

.gitignore

@@ -1,2 +1 @@
 .env/
-*.log

.pre-commit-config.yaml

@@ -1,21 +0,0 @@
----
-repos:
-  - repo: https://github.com/pre-commit/pre-commit-hooks
-    rev: v4.3.0
-    hooks:
-      - id: requirements-txt-fixer
-      - id: sort-simple-yaml
-      - id: detect-private-key
-  - repo: https://github.com/adrienverge/yamllint.git
-    rev: v1.28.0
-    hooks:
-      - id: yamllint
-        args: [-c=.yamllint]
-  - repo: https://github.com/ansible-community/ansible-lint.git
-    rev: v6.8.2
-    hooks:
-      - id: ansible-lint
-  - repo: https://github.com/shellcheck-py/shellcheck-py
-    rev: v0.8.0.4
-    hooks:
-      - id: shellcheck

README.md

@@ -16,9 +16,9 @@ If you want more context on how this works, see:
 
 Build a Kubernetes cluster using Ansible with k3s. The goal is easily install a HA Kubernetes cluster on machines running:
 
-- [x] Debian (tested on version 11)
+- [X] Debian
-- [x] Ubuntu (tested on version 22.04)
+- [X] Ubuntu
-- [x] Rocky (tested on version 9)
+- [X] CentOS
 
 on processor architecture:
 
@@ -34,7 +34,7 @@ on processor architecture:
 
 - `server` and `agent` nodes should have passwordless SSH access, if not you can supply arguments to provide credentials `--ask-pass --ask-become-pass` to each command.
 
-- You will also need to install collections that this playbook uses by running `ansible-galaxy collection install -r ./collections/requirements.yml`
+- You will also need to install collections that this playbook uses by running `ansible-galaxy install -r ./collections/requirements.yml`
 
 ## 🚀 Getting Started
 

ansible.cfg

@@ -1,23 +1,12 @@
 [defaults]
-nocows                  = True
+nocows = True
-roles_path              = ./roles
+roles_path = ./roles
-inventory               = ./hosts.ini
+inventory  = ./hosts.ini
-stdout_callback         = yaml
 
-remote_tmp              = $HOME/.ansible/tmp
+remote_tmp = $HOME/.ansible/tmp
-local_tmp               = $HOME/.ansible/tmp
+local_tmp  = $HOME/.ansible/tmp
-timeout                 = 60
+pipelining = True
-host_key_checking       = False
+become = True
-deprecation_warnings    = False
+host_key_checking = False
-callback_whitelist      = profile_tasks
+deprecation_warnings = False
-log_path                = ./ansible.log
+callback_whitelist = profile_tasks
-
-[privilege_escalation]
-become                  = True
-
-[ssh_connection]
-scp_if_ssh              = smart
-retries                 = 3
-ssh_args                = -o ControlMaster=auto -o ControlPersist=30m -o Compression=yes -o ServerAliveInterval=15s
-pipelining              = True
-control_path            = %(directory)s/%%h-%%r

inventory/sample/group_vars/all.yml

@@ -1,5 +1,5 @@
 ---
-k3s_version: v1.24.7+k3s1
+k3s_version: v1.24.4+k3s1
 # this is the user that has ssh access to these machines
 ansible_user: ansibleuser
 systemd_dir: /etc/systemd/system
@@ -22,30 +22,25 @@ k3s_token: "some-SUPER-DEDEUPER-secret-password"
 # it for each of your hosts, though.
 k3s_node_ip: '{{ ansible_facts[flannel_iface]["ipv4"]["address"] }}'
 
-# Disable the taint manually by setting: k3s_master_taint = false
-k3s_master_taint: "{{ true if groups['node'] | default([]) | length >= 1 else false }}"
-
 # these arguments are recommended for servers as well as agents:
 extra_args: >-
   --flannel-iface={{ flannel_iface }}
   --node-ip={{ k3s_node_ip }}
 
-# change these to your liking, the only required are: --disable servicelb, --tls-san {{ apiserver_endpoint }}
+# change these to your liking, the only required one is --disable servicelb
 extra_server_args: >-
   {{ extra_args }}
-  {{ '--node-taint node-role.kubernetes.io/master=true:NoSchedule' if k3s_master_taint else '' }}
-  --tls-san {{ apiserver_endpoint }}
   --disable servicelb
   --disable traefik
 extra_agent_args: >-
   {{ extra_args }}
 
 # image tag for kube-vip
-kube_vip_tag_version: "v0.5.5"
+kube_vip_tag_version: "v0.5.0"
 
 # image tag for metal lb
-metal_lb_speaker_tag_version: "v0.13.9"
+metal_lb_speaker_tag_version: "v0.13.5"
-metal_lb_controller_tag_version: "v0.13.9"
+metal_lb_controller_tag_version: "v0.13.5"
 
 # metallb ip range for load balancer
 metal_lb_ip_range: "192.168.30.80-192.168.30.90"

molecule/default/molecule.yml

@@ -4,72 +4,46 @@ dependency:
 driver:
   name: vagrant
 platforms:
-
+  - &control
-  - name: control1
+    name: control1
     box: generic/ubuntu2204
     memory: 2048
     cpus: 2
+    config_options:
+      # We currently can not use public-key based authentication on Ubuntu 22.04,
+      # see: https://github.com/chef/bento/issues/1405
+      ssh.username: "vagrant"
+      ssh.password: "vagrant"
     groups:
       - k3s_cluster
       - master
     interfaces:
       - network_name: private_network
         ip: 192.168.30.38
-    config_options:
+  - <<: *control
-      # We currently can not use public-key based authentication on Ubuntu 22.04,
+    name: control2
-      # see: https://github.com/chef/bento/issues/1405
-      ssh.username: "vagrant"
-      ssh.password: "vagrant"
-
-  - name: control2
-    box: generic/debian11
-    memory: 2048
-    cpus: 2
-    groups:
-      - k3s_cluster
-      - master
     interfaces:
       - network_name: private_network
         ip: 192.168.30.39
-
+  - <<: *control
-  - name: control3
+    name: control3
-    box: generic/rocky9
-    memory: 2048
-    cpus: 2
-    groups:
-      - k3s_cluster
-      - master
     interfaces:
       - network_name: private_network
         ip: 192.168.30.40
-
+  - &node
-  - name: node1
+    <<: *control
-    box: generic/ubuntu2204
+    name: node1
-    memory: 2048
-    cpus: 2
     groups:
       - k3s_cluster
       - node
     interfaces:
       - network_name: private_network
         ip: 192.168.30.41
-    config_options:
+  - <<: *node
-      # We currently can not use public-key based authentication on Ubuntu 22.04,
+    name: node2
-      # see: https://github.com/chef/bento/issues/1405
-      ssh.username: "vagrant"
-      ssh.password: "vagrant"
-
-  - name: node2
-    box: generic/rocky9
-    memory: 2048
-    cpus: 2
-    groups:
-      - k3s_cluster
-      - node
     interfaces:
       - network_name: private_network
         ip: 192.168.30.42
-
 provisioner:
   name: ansible
   playbooks:

molecule/default/prepare.yml

@@ -1,22 +0,0 @@
----
-- name: Apply overrides
-  ansible.builtin.import_playbook: >-
-    {{ lookup("ansible.builtin.env", "MOLECULE_SCENARIO_DIRECTORY") }}/overrides.yml
-
-- name: Network setup
-  hosts: all
-  tasks:
-    - name: Disable firewalld
-      when: ansible_distribution == "Rocky"
-      # Rocky Linux comes with firewalld enabled. It blocks some of the network
-      # connections needed for our k3s cluster. For our test setup, we just disable
-      # it since the VM host's firewall is still active for connections to and from
-      # the Internet.
-      # When building your own cluster, please DO NOT blindly copy this. Instead,
-      # please create a custom firewall configuration that fits your network design
-      # and security needs.
-      ansible.builtin.systemd:
-        name: firewalld
-        enabled: no
-        state: stopped
-      become: true

molecule/ipv6/molecule.yml

@@ -4,38 +4,30 @@ dependency:
 driver:
   name: vagrant
 platforms:
-
+  - &control
-  - name: control1
+    name: control1
     box: generic/ubuntu2204
     memory: 2048
     cpus: 2
+    config_options:
+      # We currently can not use public-key based authentication on Ubuntu 22.04,
+      # see: https://github.com/chef/bento/issues/1405
+      ssh.username: "vagrant"
+      ssh.password: "vagrant"
     groups:
       - k3s_cluster
       - master
     interfaces:
       - network_name: private_network
         ip: fdad:bad:ba55::de:11
-    config_options:
+  - <<: *control
-      # We currently can not use public-key based authentication on Ubuntu 22.04,
+    name: node1
-      # see: https://github.com/chef/bento/issues/1405
-      ssh.username: "vagrant"
-      ssh.password: "vagrant"
-
-  - name: node1
-    box: generic/ubuntu2204
-    memory: 2048
-    cpus: 2
     groups:
       - k3s_cluster
       - node
     interfaces:
       - network_name: private_network
         ip: fdad:bad:ba55::de:21
-    config_options:
-      # We currently can not use public-key based authentication on Ubuntu 22.04,
-      # see: https://github.com/chef/bento/issues/1405
-      ssh.username: "vagrant"
-      ssh.password: "vagrant"
 provisioner:
   name: ansible
   playbooks:

molecule/ipv6/overrides.yml

@@ -36,8 +36,6 @@
         #    the default has IPv4 ranges only.
         extra_server_args: >-
           {{ extra_args }}
-          --tls-san {{ apiserver_endpoint }}
-          {{ '--node-taint node-role.kubernetes.io/master=true:NoSchedule' if k3s_master_taint else '' }}
           --disable servicelb
           --disable traefik
           --disable-network-policy

molecule/resources/verify/from_outside/tasks/main.yml

@@ -3,12 +3,10 @@
   run_once: true
   delegate_to: "{{ outside_host }}"
   block:
-    - name: "Test CASE: Get kube config"
+    - ansible.builtin.import_tasks: kubecfg-fetch.yml
-      ansible.builtin.import_tasks: kubecfg-fetch.yml
     - name: "TEST CASE: Get nodes"
       ansible.builtin.include_tasks: test/get-nodes.yml
     - name: "TEST CASE: Deploy example"
       ansible.builtin.include_tasks: test/deploy-example.yml
   always:
-    - name: "TEST CASE: Cleanup"
+    - ansible.builtin.import_tasks: kubecfg-cleanup.yml
-      ansible.builtin.import_tasks: kubecfg-cleanup.yml

molecule/resources/verify/from_outside/tasks/test/deploy-example.yml

@@ -43,10 +43,6 @@
           {{ nginx_services.resources[0].status.loadBalancer.ingress[0].ip }}
         port: >-
           {{ nginx_services.resources[0].spec.ports[0].port }}
-      # Deactivated linter rules:
-      #   - jinja[invalid]: As of version 6.6.0, ansible-lint complains that the input to ipwrap
-      #                     would be undefined. This will not be the case during playbook execution.
-      # noqa jinja[invalid]
 
   always:
     - name: "Remove namespace: {{ testing_namespace }}"

molecule/resources/verify/from_outside/tasks/test/get-nodes.yml

@@ -22,7 +22,3 @@
         | unique
         | sort
       }}
-  # Deactivated linter rules:
-  #   - jinja[invalid]: As of version 6.6.0, ansible-lint complains that the input to ipwrap
-  #                     would be undefined. This will not be the case during playbook execution.
-  # noqa jinja[invalid]

reboot.sh

@@ -1,3 +0,0 @@
-#!/bin/bash
-
-ansible-playbook reboot.yml -i inventory/my-cluster/hosts.ini

reboot.yml

@@ -1,9 +0,0 @@
----
-- name: Reboot k3s_cluster
-  hosts: k3s_cluster
-  gather_facts: yes
-  become: yes
-  tasks:
-    - name: Reboot the nodes (and Wait upto 5 mins max)
-      reboot:
-        reboot_timeout: 300

requirements.in

@@ -1,13 +0,0 @@
-molecule>=4.0.3
-ansible-core>=2.13.5
-ansible-lint>=6.8.6
-kubernetes>=25.3.0
-molecule-vagrant>=1.0.0
-molecule>=4.0.3
-netaddr>=0.8.0
-pyyaml>=6.0
-yamllint>=1.28.0
-jmespath>=1.0.1
-jsonpatch>=1.32
-pre-commit>=2.20.0
-netaddr>=0.8.0

requirements.txt

@@ -1,222 +1,8 @@
-#
+ansible-core>=2.13.2
-# This file is autogenerated by pip-compile with python 3.8
+jmespath
-# To update, run:
+jsonpatch
-#
+kubernetes>=12.0.0
-#    pip-compile requirements.in
+molecule-vagrant>=1.0.0
-#
+molecule>=4.0.1
-ansible-compat==2.2.4
+netaddr>=0.8.0
-    # via
+pyyaml>=3.11
-    #   ansible-lint
-    #   molecule
-ansible-core==2.13.5
-    # via
-    #   -r requirements.in
-    #   ansible-lint
-ansible-lint==6.8.6
-    # via -r requirements.in
-arrow==1.2.3
-    # via jinja2-time
-attrs==22.1.0
-    # via jsonschema
-binaryornot==0.4.4
-    # via cookiecutter
-black==22.10.0
-    # via ansible-lint
-bracex==2.3.post1
-    # via wcmatch
-cachetools==5.2.0
-    # via google-auth
-certifi==2022.9.24
-    # via
-    #   kubernetes
-    #   requests
-cffi==1.15.1
-    # via cryptography
-cfgv==3.3.1
-    # via pre-commit
-chardet==5.0.0
-    # via binaryornot
-charset-normalizer==2.1.1
-    # via requests
-click==8.1.3
-    # via
-    #   black
-    #   click-help-colors
-    #   cookiecutter
-    #   molecule
-click-help-colors==0.9.1
-    # via molecule
-commonmark==0.9.1
-    # via rich
-cookiecutter==2.1.1
-    # via molecule
-cryptography==38.0.3
-    # via ansible-core
-distlib==0.3.6
-    # via virtualenv
-distro==1.8.0
-    # via selinux
-enrich==1.2.7
-    # via molecule
-filelock==3.8.0
-    # via
-    #   ansible-lint
-    #   virtualenv
-google-auth==2.14.0
-    # via kubernetes
-identify==2.5.8
-    # via pre-commit
-idna==3.4
-    # via requests
-importlib-resources==5.10.0
-    # via jsonschema
-jinja2==3.1.2
-    # via
-    #   ansible-core
-    #   cookiecutter
-    #   jinja2-time
-    #   molecule
-    #   molecule-vagrant
-jinja2-time==0.2.0
-    # via cookiecutter
-jmespath==1.0.1
-    # via -r requirements.in
-jsonpatch==1.32
-    # via -r requirements.in
-jsonpointer==2.3
-    # via jsonpatch
-jsonschema==4.17.0
-    # via
-    #   ansible-compat
-    #   ansible-lint
-    #   molecule
-kubernetes==25.3.0
-    # via -r requirements.in
-markupsafe==2.1.1
-    # via jinja2
-molecule==4.0.3
-    # via
-    #   -r requirements.in
-    #   molecule-vagrant
-molecule-vagrant==1.0.0
-    # via -r requirements.in
-mypy-extensions==0.4.3
-    # via black
-netaddr==0.8.0
-    # via -r requirements.in
-nodeenv==1.7.0
-    # via pre-commit
-oauthlib==3.2.2
-    # via requests-oauthlib
-packaging==21.3
-    # via
-    #   ansible-compat
-    #   ansible-core
-    #   ansible-lint
-    #   molecule
-pathspec==0.10.1
-    # via
-    #   black
-    #   yamllint
-pkgutil-resolve-name==1.3.10
-    # via jsonschema
-platformdirs==2.5.2
-    # via
-    #   black
-    #   virtualenv
-pluggy==1.0.0
-    # via molecule
-pre-commit==2.20.0
-    # via -r requirements.in
-pyasn1==0.4.8
-    # via
-    #   pyasn1-modules
-    #   rsa
-pyasn1-modules==0.2.8
-    # via google-auth
-pycparser==2.21
-    # via cffi
-pygments==2.13.0
-    # via rich
-pyparsing==3.0.9
-    # via packaging
-pyrsistent==0.19.2
-    # via jsonschema
-python-dateutil==2.8.2
-    # via
-    #   arrow
-    #   kubernetes
-python-slugify==6.1.2
-    # via cookiecutter
-python-vagrant==1.0.0
-    # via molecule-vagrant
-pyyaml==6.0
-    # via
-    #   -r requirements.in
-    #   ansible-compat
-    #   ansible-core
-    #   ansible-lint
-    #   cookiecutter
-    #   kubernetes
-    #   molecule
-    #   molecule-vagrant
-    #   pre-commit
-    #   yamllint
-requests==2.28.1
-    # via
-    #   cookiecutter
-    #   kubernetes
-    #   requests-oauthlib
-requests-oauthlib==1.3.1
-    # via kubernetes
-resolvelib==0.8.1
-    # via ansible-core
-rich==12.6.0
-    # via
-    #   ansible-lint
-    #   enrich
-    #   molecule
-rsa==4.9
-    # via google-auth
-ruamel-yaml==0.17.21
-    # via ansible-lint
-ruamel-yaml-clib==0.2.7
-    # via ruamel-yaml
-selinux==0.2.1
-    # via molecule-vagrant
-six==1.16.0
-    # via
-    #   google-auth
-    #   kubernetes
-    #   python-dateutil
-subprocess-tee==0.3.5
-    # via ansible-compat
-text-unidecode==1.3
-    # via python-slugify
-toml==0.10.2
-    # via pre-commit
-tomli==2.0.1
-    # via black
-typing-extensions==4.4.0
-    # via
-    #   black
-    #   rich
-urllib3==1.26.12
-    # via
-    #   kubernetes
-    #   requests
-virtualenv==20.16.6
-    # via pre-commit
-wcmatch==8.4.1
-    # via ansible-lint
-websocket-client==1.4.2
-    # via kubernetes
-yamllint==1.28.0
-    # via
-    #   -r requirements.in
-    #   ansible-lint
-zipp==3.10.0
-    # via importlib-resources
-
-# The following packages are considered to be unsafe in a requirements file:
-# setuptools

reset.yml

@@ -5,9 +5,3 @@
   become: yes
   roles:
     - role: reset
-    - role: raspberrypi
-      vars: {state: absent}
-  post_tasks:
-    - name: Reboot and wait for node to come back up
-      reboot:
-        reboot_timeout: 3600

roles/k3s/master/tasks/main.yml

@@ -152,19 +152,12 @@
     owner: "{{ ansible_user }}"
     mode: "u=rw,g=,o="
 
-- name: Configure kubectl cluster to {{ endpoint_url }}
+- name: Configure kubectl cluster to https://{{ apiserver_endpoint | ansible.utils.ipwrap }}:6443
   command: >-
     k3s kubectl config set-cluster default
-      --server={{ endpoint_url }}
+      --server=https://{{ apiserver_endpoint | ansible.utils.ipwrap }}:6443
       --kubeconfig ~{{ ansible_user }}/.kube/config
   changed_when: true
-  vars:
-    endpoint_url: >-
-      https://{{ apiserver_endpoint | ansible.utils.ipwrap }}:6443
-  # Deactivated linter rules:
-  #   - jinja[invalid]: As of version 6.6.0, ansible-lint complains that the input to ipwrap
-  #                     would be undefined. This will not be the case during playbook execution.
-  # noqa jinja[invalid]
 
 - name: Create kubectl symlink
   file:

roles/k3s/post/defaults/main.yml

@@ -1,3 +1,3 @@
 ---
 # Timeout to wait for MetalLB services to come up
-metal_lb_available_timeout: 120s
+metal_lb_available_timeout: 60s

roles/k3s/post/tasks/main.yml

@@ -28,9 +28,9 @@
   command: >-
     k3s kubectl wait {{ item.resource }}
     --namespace='metallb-system'
-    {% if item.name | default(False) -%}{{ item.name }}{%- endif %}
+    {% if item.name | default(False) -%} {{ item.name }} {%- endif %}
-    {% if item.selector | default(False) -%}--selector='{{ item.selector }}'{%- endif %}
+    {% if item.selector | default(False) -%} --selector='{{ item.selector }}' {%- endif %}
-    {% if item.condition | default(False) -%}{{ item.condition }}{%- endif %}
+    {% if item.condition | default(False) -%} {{ item.condition }} {%- endif %}
     --timeout='{{ metal_lb_available_timeout }}'
   changed_when: false
   run_once: true

roles/raspberrypi/defaults/main.yml

@@ -1,6 +0,0 @@
----
-# Indicates whether the k3s prerequisites for Raspberry Pi should be set up
-# Possible values:
-#   - present
-#   - absent
-state: present

roles/raspberrypi/tasks/main.yml

@@ -47,20 +47,13 @@
     - raspberry_pi|default(false)
     - ansible_facts.lsb.description|default("") is match("Debian.*bullseye")
 
-- name: execute OS related tasks on the Raspberry Pi - {{ action }}
+- name: execute OS related tasks on the Raspberry Pi
   include_tasks: "{{ item }}"
   with_first_found:
-    - "{{ action }}/{{ detected_distribution }}-{{ detected_distribution_major_version }}.yml"
+    - "prereq/{{ detected_distribution }}-{{ detected_distribution_major_version }}.yml"
-    - "{{ action }}/{{ detected_distribution }}.yml"
+    - "prereq/{{ detected_distribution }}.yml"
-    - "{{ action }}/{{ ansible_distribution }}-{{ ansible_distribution_major_version }}.yml"
+    - "prereq/{{ ansible_distribution }}-{{ ansible_distribution_major_version }}.yml"
-    - "{{ action }}/{{ ansible_distribution }}.yml"
+    - "prereq/{{ ansible_distribution }}.yml"
-    - "{{ action }}/default.yml"
+    - "prereq/default.yml"
-  vars:
-    action: >-
-      {% if state == "present" -%}
-      setup
-      {%- else -%}
-      teardown
-      {%- endif %}
   when:
     - raspberry_pi|default(false)

roles/raspberrypi/tasks/prereq/CentOS.yml

@@ -1,5 +1,5 @@
 ---
-- name: Enable cgroup via boot commandline if not already enabled for Rocky
+- name: Enable cgroup via boot commandline if not already enabled for Centos
   lineinfile:
     path: /boot/cmdline.txt
     backrefs: yes

roles/raspberrypi/tasks/prereq/Ubuntu.yml

@@ -6,8 +6,8 @@
     regexp: '^((?!.*\bcgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory\b).*)$'
     line: '\1 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory'
   notify: reboot
+  when: not ansible_check_mode
 
 - name: Install linux-modules-extra-raspi
-  apt:
+  apt: name=linux-modules-extra-raspi state=present
-    name: linux-modules-extra-raspi
+  when: (raspberry_pi) and (not ansible_check_mode)
-    state: present

roles/raspberrypi/tasks/teardown/Raspbian.yml

@@ -1 +0,0 @@
----

roles/raspberrypi/tasks/teardown/Rocky.yml

@@ -1 +0,0 @@
----

roles/raspberrypi/tasks/teardown/Ubuntu.yml

@@ -1,5 +0,0 @@
----
-- name: Remove linux-modules-extra-raspi
-  apt:
-    name: linux-modules-extra-raspi
-    state: absent

roles/raspberrypi/tasks/teardown/default.yml

@@ -1 +0,0 @@
----

roles/reset/tasks/main.yml

@@ -50,7 +50,14 @@
   systemd:
     daemon_reload: yes
 
-- name: Remove tmp directory used for manifests
+- name: Remove linux-modules-extra-raspi
+  apt: name=linux-modules-extra-raspi state=absent
+
+- name: Remove tmp director used for manifests
   file:
     path: /tmp/k3s
     state: absent
+
+- name: Reboot and wait for node to come back up
+  reboot:
+    reboot_timeout: 3600